Hot Stamping Foil for Slat Wall Panels
The slats wall foil is the wall panel family's anchor product, made for PS and PVC grating boards, PVC and wood slat wall panels, PVC foam decorative board, fastening boards, WPC doors, furniture edges and MDF boards. Its full specification is printed in the table on this page, as specification data for this product.
Hot Stamping Foil for Slat Wall Panels: substrates and applications
Heat transfer and hot stamping share one principle: heat and pressure persuade a prepared film to give up its decorative layer to the substrate beneath it. The film carries the pattern; the substrate keeps it. Everything in this catalogue is a variation on that exchange, tuned by substrate, pattern and finish.
Custom development follows the same path as the standard range: a design brief or a sample, a pattern developed or matched, a proof on film, a trial on your substrate, and then production. Yearly colour card collections keep the standard range moving, so a pattern family you like can usually be refreshed rather than reinvented.
Wall panels, grille and slat panels and louver panels turn film into architecture: long vertical lines, repeating ribs and shadow gaps all depend on the pattern running true along the panel length. Wood designs lead this family, supported by cement texture, gilded fluid stone, teak straight grain and brushed metallic skin textures.
Hot Stamping Foil for Slat Wall Panels: pattern families in this range
A good inquiry is short but specific: the film type you are considering, the substrate you run, the width and roll length on your machine, and the quantity per design. With those four inputs a quote can confirm the minimum run, the price and the delivery schedule for exactly the film you need.
Storage decides how a film performs months after delivery. Keep rolls in a ventilated, shaded, cool place, protected from pressure, dampness, heat and direct sunshine, and keep each roll in its wrapping until it reaches the machine.
Slat and grille panels are usually specified by the room mood first and the panel profile second. Warm oak straight grains suit living spaces, wave-pattern wood adds movement to feature walls, and fragmented gold or rust-stained looks give commercial interiors a deliberate accent. Because the ribs repeat, pattern scale matters: a grain that is too large breaks across the ribs, while a fine grain reads as one continuous surface.
Hot Stamping Foil for Slat Wall Panels: how the finish is produced
Samples are the fastest route through this catalogue. Stock samples and catalogues let you judge colour, gloss and pattern scale on your own substrate and under your own light before any production quantity is discussed, and custom patterns begin from your drawings or physical samples.
Wall panels, grille and slat panels and louver panels turn film into architecture: long vertical lines, repeating ribs and shadow gaps all depend on the pattern running true along the panel length. Wood designs lead this family, supported by cement texture, gilded fluid stone, teak straight grain and brushed metallic skin textures.
Decorative boards and fastening boards in this family cover the flat companions to ribbed panels, so a wall scheme can mix slatted feature sections with plain board sections in the same finish. Ordering both from one film family keeps colour and gloss consistent where the two surfaces meet.
Full specification for the slats wall foil
| Item | Specification |
|---|---|
| Thickness | 19–23 microns |
| Width | 64 cm |
| Roll length | 300 m / 500 m / 610 m / 800 m / 1000 m per roll |
| Colours | Wood grain, golden, silver, fiber drawing, aluminized, matte, brushed |
| Stamping temperature | 110–140 °C |
| Storage | Ventilated, shaded, cool place; protect from pressure, dampness, heat and sunshine |
| Storage period | 2 years |
| Packing | Roll wrapped with air bubble film, one roll in one carton |
| Customisation | Specifications and colour adjustable according to customer requirement |
The figures in this table are the specification data for this product. For a different width, finish or roll length, send the specification you run and the film can be checked against it.
Hot Stamping Foil for Slat Wall Panels: ordering and samples
Custom development follows the same path as the standard range: a design brief or a sample, a pattern developed or matched, a proof on film, a trial on your substrate, and then production. Yearly colour card collections keep the standard range moving, so a pattern family you like can usually be refreshed rather than reinvented.
Slat and grille panels are usually specified by the room mood first and the panel profile second. Warm oak straight grains suit living spaces, wave-pattern wood adds movement to feature walls, and fragmented gold or rust-stained looks give commercial interiors a deliberate accent. Because the ribs repeat, pattern scale matters: a grain that is too large breaks across the ribs, while a fine grain reads as one continuous surface.
For louver panels, the slats themselves shade the pattern, so buyers often choose slightly stronger contrast than they would for a flat board. A short trial on your own panel profile, viewed under your showroom lighting, is the reliable way to settle the final tone before a full run.
What to send with your inquiry
Request a quote for this film: send the substrate, the width you run and the quantity per design.