Hot Stamping Foil for Wall Panels
Wall panel foil covers decorative boards, wall panels, grille and slat panels, louver panels and skirting. Cement texture, gilded fluid stone, teak straight grain, wave-pattern wood, brushed metallic skin and clear oak designs turn panel systems into finished architecture.
Hot Stamping Foil for Wall Panels: the range in this family
Hot Stamping Foil for Slat Wall Panels
The slats wall foil is the wall panel family's anchor product, made for PS and PVC grating boards, PVC and wood slat wall panels, PVC foam decorative board, fastening boards, WPC doors, furniture edges and MDF boards..
Hot Stamping Foil for Louver Panels
Louver and grille panels shade their own pattern: every slat throws a shadow line across the next, so louver foil is chosen with stronger contrast and patterns that stay legible in stripes of light and shade..
Hot Stamping Foil for Decorative Boards
Decorative boards are the flat companions of the panel range: wall boards, furniture boards and interior panels that carry a finish across an unbroken surface..
Anchor product specification, labelled by product
| Product | Specification highlights |
|---|---|
| Slats wall foil | Thickness 19–23 µm; width 64 cm; roll lengths 300–1000 m |
Hot Stamping Foil for Wall Panels: where this family is applied
| Form | Application notes |
|---|---|
| Flat boards and panels | Wood grain, stone and fabric patterns at full panel scale |
| Profiles and mouldings | Patterns in register along long lengths |
| Sheets and parts | Finishes matched to the end product and its daily use |
Hot Stamping Foil for Wall Panels: ordering and samples
For louver panels, the slats themselves shade the pattern, so buyers often choose slightly stronger contrast than they would for a flat board. A short trial on your own panel profile, viewed under your showroom lighting, is the reliable way to settle the final tone before a full run.
A good inquiry is short but specific: the film type you are considering, the substrate you run, the width and roll length on your machine, and the quantity per design. With those four inputs a quote can confirm the minimum run, the price and the delivery schedule for exactly the film you need.
Custom development follows the same path as the standard range: a design brief or a sample, a pattern developed or matched, a proof on film, a trial on your substrate, and then production. Yearly colour card collections keep the standard range moving, so a pattern family you like can usually be refreshed rather than reinvented.
Hot Stamping Foil for Wall Panels: care, storage and repeat orders
Panels are large, light and handled often during installation, so the finish has to survive transport and fitting as well as daily life in the room. The wall panel films in this range are developed for decorative boards, PVC foam board, wood slat panels and WPC doors that share the same installation world.
Samples are the fastest route through this catalogue. Stock samples and catalogues let you judge colour, gloss and pattern scale on your own substrate and under your own light before any production quantity is discussed, and custom patterns begin from your drawings or physical samples.
Storage decides how a film performs months after delivery. Keep rolls in a ventilated, shaded, cool place, protected from pressure, dampness, heat and direct sunshine, and keep each roll in its wrapping until it reaches the machine.
What to send with your inquiry
Ask about this film family: send the substrate, the finish you want and the quantity per design.