MDF008 Gold Wood Grain Foil for MDF Awards Plaque Edge Banding
The MDF008 gold wood grain foil is the range's anchor product for edge banding work: trophy and awards plaque edges, frameless-picture edges and furniture edge faces where a narrow band has to carry a convincing wood finish. Its full specification is printed in the table on this page, as specification data for this product.
MDF008 Gold Wood Grain Foil for MDF Awards Plaque Edge Banding: how the finish is produced
Edge banding deserves its own line in any inquiry. Plaque and frameless-picture edges, flooring chamfers and cabinet edges run narrower film than face panels, and the pattern scale must suit the narrow face. Tell us which widths are face work and which are edge work so the film set is planned as one matched family.
Heat transfer and hot stamping share one principle: heat and pressure persuade a prepared film to give up its decorative layer to the substrate beneath it. The film carries the pattern; the substrate keeps it. Everything in this catalogue is a variation on that exchange, tuned by substrate, pattern and finish.
Samples are the fastest route through this catalogue. Stock samples and catalogues let you judge colour, gloss and pattern scale on your own substrate and under your own light before any production quantity is discussed, and custom patterns begin from your drawings or physical samples.
MDF008 Gold Wood Grain Foil for MDF Awards Plaque Edge Banding: ordering and samples
Buyers comparing film with painting or veneer on MDF usually focus on consistency: every panel leaves the line with the same grain placement logic and the same gloss level, and repeat orders return to the same pattern. Send your board thickness, panel sizes and the finish you are replacing, and the shortlist will be built around your current production reality.
A good inquiry is short but specific: the film type you are considering, the substrate you run, the width and roll length on your machine, and the quantity per design. With those four inputs a quote can confirm the minimum run, the price and the delivery schedule for exactly the film you need.
Custom development follows the same path as the standard range: a design brief or a sample, a pattern developed or matched, a proof on film, a trial on your substrate, and then production. Yearly colour card collections keep the standard range moving, so a pattern family you like can usually be refreshed rather than reinvented.
MDF008 Gold Wood Grain Foil for MDF Awards Plaque Edge Banding: care, storage and repeat orders
Surfaces in daily use need finishes that wipe clean and resist the knocks of furniture life. The company develops its MDF patterns for exactly that service, pairing decorative grains with surface structures intended for furniture, doors and storage cabinets that are handled every day.
Samples are the fastest route through this catalogue. Stock samples and catalogues let you judge colour, gloss and pattern scale on your own substrate and under your own light before any production quantity is discussed, and custom patterns begin from your drawings or physical samples.
Storage decides how a film performs months after delivery. Keep rolls in a ventilated, shaded, cool place, protected from pressure, dampness, heat and direct sunshine, and keep each roll in its wrapping until it reaches the machine.
Full specification for the MDF008 gold wood grain foil
| Item | Specification |
|---|---|
| Model | MDF008 |
| Type | Wood grain / solid colours |
| Film thickness | 45–50 micron |
| PET thickness | 23 micron |
| Size | 500 m × 64 cm; also offered as 1000 m × 64 cm |
| General range | Width 640 mm / 1280 mm; thickness 19–50 microns; length 500 / 600 / 610 / 1000 m per roll; core 1 inch / 3 inches |
| Finish | Glossy or matte, can be customised |
| Sample | Free |
| Storage period | 2 years |
| Packing | Cartons and pallet |
The figures in this table are the specification data for this product. For a different width, finish or roll length, send the specification you run and the film can be checked against it.
MDF008 Gold Wood Grain Foil for MDF Awards Plaque Edge Banding: substrates and applications
Heat transfer and hot stamping share one principle: heat and pressure persuade a prepared film to give up its decorative layer to the substrate beneath it. The film carries the pattern; the substrate keeps it. Everything in this catalogue is a variation on that exchange, tuned by substrate, pattern and finish.
Custom development follows the same path as the standard range: a design brief or a sample, a pattern developed or matched, a proof on film, a trial on your substrate, and then production. Yearly colour card collections keep the standard range moving, so a pattern family you like can usually be refreshed rather than reinvented.
MDF is the workhorse substrate of this range: furniture panels, lacquer-free doors, door casing lines, cabinets, wardrobes, television cabinets, flooring edges and trophy plaque banding all take heat transfer film as their finished surface. The board supplies a flat, even base, and the film supplies colour, grain and touch in a single pass.
What to send with your inquiry
Request a quote for this film: send the substrate, the width you run and the quantity per design.