Wood Grain Foil Designs
The wood grain family spans oak, teak, elm and maple burl, in annual-ring, straight-grain and rotary-cut structures. Colour runs from pale Nordic tones to deep antique shades, with Morandi colour schemes softening the fabric-metal members of the family.
Wood Grain Foil Designs: the range in this family
Wood Grain Foil Designs: where this family is applied
| Form | Application notes |
|---|---|
| Flat boards and panels | Wood grain, stone and fabric patterns at full panel scale |
| Profiles and mouldings | Patterns in register along long lengths |
| Sheets and parts | Finishes matched to the end product and its daily use |
Wood Grain Foil Designs: how the finish is produced
Edge banding deserves its own line in any inquiry. Plaque and frameless-picture edges, flooring chamfers and cabinet edges run narrower film than face panels, and the pattern scale must suit the narrow face. Tell us which widths are face work and which are edge work so the film set is planned as one matched family.
Heat transfer and hot stamping share one principle: heat and pressure persuade a prepared film to give up its decorative layer to the substrate beneath it. The film carries the pattern; the substrate keeps it. Everything in this catalogue is a variation on that exchange, tuned by substrate, pattern and finish.
Samples are the fastest route through this catalogue. Stock samples and catalogues let you judge colour, gloss and pattern scale on your own substrate and under your own light before any production quantity is discussed, and custom patterns begin from your drawings or physical samples.
Wood Grain Foil Designs: ordering and samples
Buyers comparing film with painting or veneer on MDF usually focus on consistency: every panel leaves the line with the same grain placement logic and the same gloss level, and repeat orders return to the same pattern. Send your board thickness, panel sizes and the finish you are replacing, and the shortlist will be built around your current production reality.
A good inquiry is short but specific: the film type you are considering, the substrate you run, the width and roll length on your machine, and the quantity per design. With those four inputs a quote can confirm the minimum run, the price and the delivery schedule for exactly the film you need.
Custom development follows the same path as the standard range: a design brief or a sample, a pattern developed or matched, a proof on film, a trial on your substrate, and then production. Yearly colour card collections keep the standard range moving, so a pattern family you like can usually be refreshed rather than reinvented.
What to send with your inquiry
Looking for a pattern in this family? Send a photo or sample description and the substrate you run.